Why service your vehicles tires with Rayco?
Finding a trustworthy place to service your vehicle’s tires doesn’t have to be a hard decision. Our technicians and advisors are specialists. They participate in regular Bosch training to understand your vehicle inside and out. When you service with Rayco Eurospec Motorcars, you can expect the best quality automotive service delivered in a timely manner. With so many conveniences, resources and equipment specifically designed for your vehicle, choosing Rayco for your tire service needs is an easy choice.
We Specialize in High-Performance Speed-Rated Tires.
We use Hunter Road Force Precision Balance.
Up to 24" rims - no harm to alloy wheels.
It’s Not Just About Wear. Do You Know When to Replace Your Tires?
There are many reasons why tires should be replaced. Here are some Rayco recommendations based on currently available information:
- The vehicle manufacturer owner’s manual may have specific instructions covering tire inspections and replacement considerations based on the vehicle manufacturer’s understanding of the specific vehicle application. Drivers should use their vehicle owner’s manual to confirm any tire inspection or replacement recommendations.
- Tires should be replaced when their remaining tread depth is no longer appropriate for the weather conditions expected to be encountered. Rayco recommends replacing tires at approximately 5/32″ of remaining tread depth for driving in snow, 4/32″ for driving on wet roads and 2/32″ for driving on dry roads.
- Most small cuts and punctures in the tread area (up to 1/4″in size) can be repaired by trained personnel using industry-approved methods. These tires can be returned to service if they have not been driven on while flat or with very low inflation pressure.
- Tires cut or punctured in the shoulder or sidewall areas, as well as any tires driven on while flat or with very low inflation pressure even for short periods of time are often damaged beyond repair and should be replaced. Driving on a tire while flat or with very low inflation pressure will permanently weaken the tire’s internal structure, rendering it more susceptible to catastrophic failure.
- Tires that exhibit any bubbles, blisters or bulges, or have large cuts, cracks or other significant damage from road hazards in the tread, shoulder and/or sidewall areas should be replaced. Only inspecting the tire’s inner-liner after dismounting the tire from the wheel will reveal the probable cause and help determine if the tire manufacturer’s workmanship and materials warranty applies.
- Most tires will need to be replaced for other reasons before any prescribed calendar age, therefore the following recommended calendar age removal periods in no way reduces the driver’s responsibility to replace worn or damaged tires as needed.
- Tires that have been in use for five (5) years or more should be carefully inspected periodically for external signs of aging. While this inspection will confirm the condition of the exterior rubber, it cannot assess internal degradation or damage.
- Previously unused, never-mounted tires should not be put into service if they are more than six (6) years old, even if they were properly stored.
- All tires (including spare tires) manufactured more than ten (10) years previously should be removed from service and be replaced as a precaution, even if such tires appear serviceable and have not reached the legal wear limit.